不銹鋼反應釜的工作原理就是兩種或兩種以上介質在一定的溫度下伴隨攪拌進行某種反應，如不銹鋼反應釜內部物料的溫度控制不好，會大幅度降低生產率甚至報廢整個釜內物料，那么如何檢測不銹鋼反應釜內物料溫度并且對其加以控制呢？

檢測方法：可以用PT100溫度計，用密封的不銹鋼管子插入斧內，管子里加進去一些導熱油，把溫度計塞到導熱油以下就可以，不會有太大的誤差的。

溫度過高的控制

1、停止加熱：通過電器控制箱上的溫度顯示儀表及報警器可方便、快捷地判斷出不銹鋼反應釜內部物料的溫度情況，當溫度過高時，電器控制器按設定的程序自動地停止某組電加熱器的工作，將溫度保持在恒定的范圍內。

2、啟動釜內的冷卻盤管：釜內的冷卻盤管一般作為冷卻用，如當檢測到不銹鋼反應釜內部物料的溫度可能很高時，及時啟用內部冷卻盤管，并加大冷卻水的流量，及時有效地降低不銹鋼反應釜內部物料的溫度。

3、持續攪拌。

溫度過低時的控制

啟動剩余加熱器：通常情況下，在不銹鋼反應的設計與制作中會為用戶考慮到，生產過程會更換不同的物料，不同物料的理化特性不同，加熱效果也不同，因此會相應適當增加加熱器的功率，根據不同的物料進行選擇，當溫度過度低時，啟用剩余加熱器便可。

The working principle of stainless steel reactor is two or more than two kinds of medium at a certain temperature with stirring for a reaction, such as stainless steel reactor internal material temperature control is not good, will greatly reduce the productivity and scrap materials the kettle, so how to detect the temperature of materials of stainless steel reactor and to control them.?

Test method: you can use the PT100 thermometer, stainless steel pipe sealing insert axe, the add in some oil, put the thermometer into the heat conduction oil below it, won't have too big error.

Control the temperature too high

1、Stop heating: according to the electrical control box on the temperature display instrument and alarm can be convenient, quick to judge the temperature stainless steel reactor internal material, when the temperature is too high, electric controller programmed automatically stop a group of electric heater, the temperature is maintained at a constant range.

2、Start the cooling coil in the cauldron: cooling coil reactor is generally used as cooling, such as when the stainless steel reactor internal temperature of the material may be high, to enable the internal cooling coil, and to increase the flow of cooling water, timely and effectively reduce the stainless steel reactor internal temperature of the material.

3、Continuous mixing

Control when the temperature is too low.

Start the remaining heater: under normal circumstances, in the design and manufacture of stainless steel reaction will be considered for the user to be replaced, the production process of different materials, different materials have different physical and chemical properties, the heating effect is different, so will be appropriate to increase the power of the heater, according to different material choice, when the temperature is too low when enabled, the remaining heater can.